AQUATUFF - LIQUID 25 Ltr

Aquatuff marine hold cleaning and degreasing chemicals

Featured Product :

Featured Product

Article News:

Aquatuff MSDS

Degreaser for Engine and work station

Skin Cleaning Paste supplier

Aquatuff Ship hold cleaning chemical

Aquatuff, ACC, Carbon Remover, Electrosolve supplier

Aquatuff chemicals along with ship hold cleaning equipments

Short Description:

Information:

Aquatuff High Foam is a heavy duty alkaline cleaner for Ship Hold cleaning. And we are keeping ready stock of Aquatuff in Mumbai, JNPT, Surat, Kandla, Gnadhidham, Mundra, Chennai, Ennore, Manglore, Goa, Vizag - Gangavaram, Kolkata, Haldia, Paradip, Krishnapatnam - INDIA.

↧

AQUA Tuff High Foam conc.

December 5, 2017, 9:59 pm

≫ Next: Hand Cleaner Paste Waterless 1 Kg X 6 No

≪ Previous: AQUATUFF - LIQUID 25 Ltr

Aquatuff high foam liquid always be wise decision to clena ship cargo hold. As before loading of cargo surveyor first demand is - Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

Active Matter:

45-50

Application:

Most Help full cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds Aquatuff High Foam plays very important role during washing down with use of chemicals. Aquatuff High foam classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Packing Size:

210.00 Ltr.

Image:

Thumb:

Using Procedure:

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

The Importance High-Pressure Cleaning

The job of high pressure cleaning can be done easier & quicker by simply using AquaTuff in correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1: Spraying the AquaTuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.

After the AquTuff has been sprayed on the surface and before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the AquaTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of AquaTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of AquaTuff in correct dosages is half the job done.

General Cleaning :- AquaTuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination AquaTuff should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of AquaTuff to a bucket of water. AquTuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the Aquatuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, AquaTuff is not recommended for washing machines.

Note:

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Preparation

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,

beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,

Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge

cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,

scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold

as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale

Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo

stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove

all odour and later rinsed with fresh water

Related Products:

AQUATUFF LIQUID 50 Ltr

Cement Remover RX Hold

COAL REMOVER rx hold 50 Ltr

Lime Remover HD 25 Ltrs

Slip Coat RXSOL HOLD BLOCK 210 Ltr

Hold Wash Concentrate RX

Safety Accessories:

Aquatuff marine hold cleaning and degreasing chemicals

Burlup

Featured Product :

Featured Product

Article News:

Aquatuff MSDS

Short Description:

Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washi

Information:

Aquatuff High foam is specialized ship hold bulk carrier cleaning chemicals. Our group team also providing direct online support for cleaning tips during Hold cleaning of ships. Aquatuff High Foam MSDS and Using procedure also available online to our customer. We are one of largest ship hold cleaning chemicals supplier in India - Middle East which also covers Lime Remover, Coal Remover, Slip coat, Hold Wash and many more...Pl. click here ( http://www.rxmarine.com/HoldSolution-22 ) to know our various range of Hold Cleaning products...

↧

Hand Cleaner Paste Waterless 1 Kg X 6 No

December 5, 2017, 10:17 pm

≫ Next: Bilge Clean 20 Ltr

≪ Previous: AQUA Tuff High Foam conc.

It is a milky white creamy gel containing natural ingredients, moisturisers, surfactants, and powerful dispersing agents. This is a batter substitute to petroleum products & caustic based detergetns which drain the body oil. ONLY 2 TO 5 grams SUFFICIENT to clean most greasy hand.

Active Matter:

100%

Application:

Ideal for personnel working in metal and chemical Industries, oil fields, ship maintenance, garrage and machine shops as well as in manufacture of Engines & Transmission etc.

Removes the toughest grease tar grime ink paints sealants adhesives and other difficult soils.

It is massaged on to the soiled / greased skin without the use of water. The skin should then either be rinsed with clean water or wiped thoroughly with towel / tissue paper. it removes even the most stubborn grease and grime thoroughly yet gently.

Characteristics and Advantages

Active substances based on natural vegetable fats of high quality.
Moisturizing.
No added preservatives.
Quick and at the same time gentle skin cleansing in case of heavy profound soilings.
Economical in use.
Long storage life without decrease in quality or viscosity.

Ready stock of : RXSOL-16-1001-020
500 gram, 1 kg, 3 kg, 5 kgs

Packing Size:

6.00 Kg (Paste)

Image:

Thumb:

Using Procedure:

This is a better substitute of petroleum products & caustic based detergent which drain the body oil . It removes even the most stubborn grease and grime thoroughly yet gently. Multi-purpose heavy duty cleaning agent.

Normal 2-5 grams is sufficient to apply , but depends on degree of contamination and cleaning required . In hard cleaning repetition may require.

Harmful , If ingested ,induce vomiting and seek medical attention

Note:

Avoid contact with wounded skin

Super tough premium industrial waterless hand cleaner gel , uses orange / lemon peel extract , effectively remove wet paint, printing inks, greases, Oil, Adhesives, grime, Carbon black, glue and several other to remove most stubborn Hand cleaner manufacturer and exporter from India , for Wholesaler and Trader Greaseless, waterless hand cleaner. ; Fresh orange / lemon scent; Contains no petroleum distillates to dry out skin Hand Cleaner Gel is not flammable and will not burn Doesn't Contains pumice , its unique formulation provide heavy- duty cleaning & deep scrubbing action

Related Products:

Hand Cleaner Paste ( Waterless 500 Gram jar )

Hand Cleaner Paste Waterless 4 Kg jar

Degreaser Biosolv

Carbon Remover 25 Ltrs

Safety Accessories:

Shoes Covers (1 box=100pcs)

Featured Product :

Featured Product

Article News:

skin care paste in Gandhidham

waterless Industrial hand cleaner paste price

Skin Cleaning Paste supplier

Short Description:

↧

Bilge Clean 20 Ltr

December 5, 2017, 10:19 pm

≫ Next: Seacleaner 25 Ltr

≪ Previous: Hand Cleaner Paste Waterless 1 Kg X 6 No

RXSOL-10-1002-020 : is a powerful degreaser for engine rooms and fuel cargo tanks . It is non-toxic which makes handling easy . RXSOL-10-1002-020 is mainly breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.

Alias:

Degresol , Rem-Oil, Bilge Cleaner, Solbreak, AMEROID OWS, SUPER CLEANER

Active Matter:

81 - 83%

Application:

RXSOL-10-1002-020 is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering. It is highly recommended for heavy duty degreasing action .

Packing Size:

20.00 Ltr.

Image:

Thumb:

Using Procedure:

Typical dose rate: 100 - 500 ppm (0.1 - 0.5 litre/m3 of water)

In a multistage bilge water cleaning system, RXSOL-10-1002-020 is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation It is highly recommended for heavy duty degreasing action , Depending on contamination 5-25% with fresh water.

Note:

Featured Product :

Featured Product

Short Description:

Powerful degreaser for engine rooms and fuel cargo tanks . It is non-toxic which makes handling easy . RXSOL-10-1002-020 is mainly breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It

↧

Seacleaner 25 Ltr

December 5, 2017, 10:20 pm

≫ Next: Chembreak QUICK SEPARATING DEGREASER 25 Ltr

≪ Previous: Bilge Clean 20 Ltr

Alias:

Tank Shine, Voyage Cleaner, Careclean Voyage, EAZY TANKWASH, SeaClean, ROCHEM SEACLEAN, 652 571406

Active Matter:

98-100

Application:

RXSOL seaclean is formulated for cleaning double bottom, deep and wing tanks used for petroleum fuel oils. Aromatic chain compound have special feature and its chain bonding in molecules are very strong, so its cleaning always required special type of cleaner.

Our team is continiously working on daily problem faced by customer, and observed that after using of SEA Clean all oil base compound are emulsifed and cleaned out. But if tanks / vessel are required complete removal of hydrocarbon even traces, smell from tank surface then repetition of tank cleaning through RXSOL-16-1011-210 .

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Directions for Use and Dose Rates: RXSOL-20-2002-025is specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.

Soak Method: for heavy soil put parts into undiluted RXSOL-20-2002-025, for general soiling use a solution of 10-30% RXSOL-20-2002-025 in water. Parts should be soaked for at least 30 minutes before washing off with water.

Spraying Method: Use neat RXSOL-20-2002-025 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits.

Rock and Roll Method: Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.

1.First of all heat the remaining oil in tanks .
2.By stripping constantly. flush the tank with sea water,
3.Close all suction and discharge valves .
4.1^stDose Fill the tanks by½ to 1 litre RXSOL-20-2002-025per tone of water through pipe or manhole, for 75-80% of capacity of tank to be cleaned.
5.Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6.Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7.Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8.Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9.For completion add second dose of RXSOL-20-2002-025, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10.Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11.To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely

Note:

Highly concentrated product easily emulsify solvent and petroleum product. This products are classified as a degreaser and tank cleaner.

Related Products:

Tank Cleaner

Metal Brite

CTC Volc Cleaner 25 Ltr

Lac Alka Liquid HD 25 Ltrs

B Solve Tank Cleaner & Degreaser

Cold Washer HD

Alkaleen Liquid Heavy Duty 25 Ltr

Safety Accessories:

Tank clean supplier in Mumbai

Featured Product :

Featured Product

Article News:

Heavy Duty Tank cleaner

Seaclean Tank cleaner and degreaser

Butyl Cellosolve Tank Cleaner

Seaclean for Soot Cleaning

Seaclean Price in India - Middle East

Short Description:

Specially formulated for cleaning of tank bottom, deep and wing tanks etc, used for fuel oils. And also very useful product for local cleaning and degreasing of engine rooms and on deck.

Information:

Seaclean Degreaser supplier in Mumbai, Kandla, Chennai, Vizag, Goa, Kolkata, Haldia, Paradip, Goa, Manglore. Sea clean available in various size of packing as per customer demand. Seaclean product easily dissolves in water which is resulting non flammable degreaser for heavy industries as well as Seaclean is most popular degreaser in Marine and Oil filed industries.

↧

Chembreak QUICK SEPARATING DEGREASER 25 Ltr

December 5, 2017, 10:21 pm

≫ Next: Hand Cleaner Soil Remover Heavy Duty

≪ Previous: Seacleaner 25 Ltr

Unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker "C" cleaners.

Alias:

Breaker/WWT, Clean Break Quick Split Cleaner, Careclean Quick Spilt, Desludger Chemical, Sludge Remover, Amerioid OWS, Eazy OWS Cleaner,

Active Matter:

85 - 88 %

Application:

Ideally suited for slop tanks. Also recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. Low toxicity, non - corrosive. Highly effective, economical solvent cleaner.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

For light contamination dilute with water in the ratio 1:20 . For medium contamination dilute with a petrosolvent. And for heavy contamination concentrated RXSOL-20-2006-025 is suggested.

For Engine Room & Cargo Tank Cleaner

Product Description:- RXSOL-20-2006-025 is an all purpose degreaser emulsifiers, It is an excellent blend of powerful solvent base and emulsifying inorganic products .Specially designed for engine room and cargo tank cleaning .Main feature of RXSOL-20-2006-025 is, it finally dissociate slop emulsion to separate oil and water .This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation .

Dosage:- Dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with Petro solvent , And for heavy contamination neat RXSOL CB 2006 is suggested to use.

Procedure of use :- RXSOL-20-2006-025 is recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. It may be applied by brush, spray, immersion, soaking, or any other conventional means.RXSOL-20-2006-025 is used neat. Allow a residence time of at least 20- 45 minutes where possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed to separate in a holding tank for atleast 3-5 hours before passing through an oily water separator.

Tank Cleaning after Mineral Oils/ Lube Oils / Slope-Black Oil
1 ) Fill the tank with 1-35 litres per ton wash water.Best results are obtained when water is heated to a temperature between 65°C & 80°C then stripped constantly and transferred to a holding tank for separation.The time for this will vary depending on amount of RXSOL-20-2006-025 used & nature of oil being cleaned.Generally,12 hours should be sufficient before the water phase can be removed.
2) Direct Cleaning.Spray directly RXSOL-20-2006-025 on tank surfaces to be cleaned, left for at least 30 minutes.Finally wash with hydrogating (high pressure) machine. Hot water between 50°C & 80°C recommended.

Related Products:

Bilge Clean Seprasol Heavy Duty 25 Ltr

Ballast Tank Cleaner

Degreaser Heavy Duty - 25 ltr

Degreaser Biosolv

Safety Accessories:

Chembreak Quick Separating Degreaser - A powerful all-purpose degreaser

Featured Product :

Featured Product

Article News:

Seaclean Tank cleaner and degreaser

Degreaser for Engine and work station

Seaclean Concentrated cleaner

Degreser for Engine and spare parts

Short Description:

↧

Hand Cleaner Soil Remover Heavy Duty

December 5, 2017, 10:37 pm

≫ Next: Demulsifier 210 Ltr

≪ Previous: Chembreak QUICK SEPARATING DEGREASER 25 Ltr

Private labeling option : This bulk packing is suitable for PRIVATE LABELING OPTION, for our big dealer.

Alias:

impa :550266 , 550285, REINOL HANDWASHPASTE

Packing Size:

220.00 Kg.(PWD)

Image:

Thumb:

Related Products:

Hand Cleaner Paste Waterless 4 Kg jar

Hand Cleaner Paste Waterless 1 Kg X 6 No

Hand Cleaner Paste Waterless 25 Kg Bucket

Skin Care Paste, Waterless hand Cleaner 1 Kg

Hand Cleaner Paste ( Waterless 500 Gram jar )

Hand Liquid Disinfectant Antiseptic

Hand Liquid Disinfectant Antiseptic1 Ltr

Featured Product :

Featured Product

Short Description:

Hand Cleaner Paste ( Waterless 210 Kgs)

↧

Demulsifier 210 Ltr

December 8, 2017, 5:28 am

≫ Next: Truck Wash Brightener

≪ Previous: Hand Cleaner Soil Remover Heavy Duty

Oilfield Chemicals Demulsifiers

Alias:

Pasetreat 6410, Clarient P 6752, DEMTROL,

Active Matter:

90-93

Application:

RXSOL DEMULSIFIER is Water-In-Oil Demulsifiers, which can be used as stand-alone Demulsifiers to separate Formation Water from Crude Oil Emulsion. There are vast differences and Characteristics of Crude Oils produced in various Fields. Use and application Oil Soluble Demulsifier Testing & Selection is accomplished by standard Bottle Tests in Lab followed by Field Trial Tests. They are commonly used in the processing of crude oil for effectively separating formation water from emulsions in crude oil.

Packing Size:

210.00 Ltr.

Image:

Thumb:

Using Procedure:

Dose recommendations have to be made on a case-by-case basis. The dosage of RXSOL DEMULSIFIER prescribed to break a particular emulsion varies from as little as 1 ltr per 20,000 Ltrs (50 ppm) of oil to as much as 1 Ltr per 10,000 ltrs (100 ppm) of oil. A few companies have even found that 20 ppm was more effective than the higher dosages, so we suggest adding the lower levels to your laboratory bench tests to verify the correct dosage for the specific application. Finding the most cost-effective dosage, as well as determining the best conditions of temperature, slow mixing, settling time, etc., is best done in the laboratory, using a sample of the actual oil or waste and a sample of Demulsifier.

Methodology for Evalution of Demulsifier :

Step 1 :Treat 100ml of the emulsion with 40 mg/litre of Demulsifer, (using 1% w/v solution in xylene in 100 ml graduatd conical tube) and give 100 shakes of approximately 12 in stroke

Step 2 : Place treated emulsion in water bath maintained at 70 +1oC for a period of 15 minutes and allow it to settle for 5 minutes at 30+2oC. measure the quantity of clear water settled

Step 3 : Conduct a blank test with untrented emulsion under condition similar to treated emulsion

Step 4 : Substract the water seprator if any in blank test from treated sample and denote it as V. Similarly subtract the water separated from blank from total water present in emulsion and denote it Vo.

Report Efficiency Percentage as Follow : % Effiency =(V/ Vo) x 100

Note:

Futrue and Benefit :

Contains surface-active materials
Separates water from oil
Free from defilements
Excellent stability
Precise chemical composition
Easy to Handle.

Storage and Handling :

RXSOL DEMULSIFIER shall be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be handled with dry absorbent like sand, sawdust, etc. On ingestion / eye contact with the product, medical attention should be sought immediately.

Related Products:

Demulsifier Emulsion Breaker 25 Ltr

Demulsifier ORG

Reverse Demulsifier

Oil Spill Dispersant Type-I 25 Ltrs

Sediment Mud Silt Poly electro Dispersant

Condensor Dispersant Scale Fouling Controler 260 Kgs

Pour Point Dispersant (Polymethacrylate Base)

Safety Accessories:

PVC Chemical Resistance Boot

Featured Product :

Featured Product

Short Description:

Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water.

↧

Truck Wash Brightener

December 9, 2017, 9:14 pm

≫ Next: HEDP 60%

≪ Previous: Demulsifier 210 Ltr

Truck Wash Brightener is a clear liquid which contains inorganic acids and surface active agents that are specifically blended into a stable, highly active concentrate for the cleaning and brightening tractors and tractor trailers. Some of its uses include cleaning bright surfaces, removal of light rust, corrosion protection, conditioner of painted surfaces and conditioning aluminum surfaces.

Active Matter:

63-72

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Dilute with water before using. The level of dilution depends on the nature and the temperature of the surface being treated.

Can be applied by brushing or high pressure spray wash.

Always Work from bottom to top both on application and rinse. Allow the solution to work for 10 minutes or less prior to rinsing.

Recommended concentrations are 10:1 dilutions for brush application and 20:1 for pressure washing application.

Do not permit solution to dry on surface, rinse completely and preferably by covering area with a high pressure rinse.

When used as directed, it is safe on aluminum, copper, Plexiglas, stainless steel, brass, iron, painted surfaces, steel, bronze, lead and rubber. Also very effective in removing brake dust and black carbon stains. It is not safe on galvanized surfaces, zinc magnesium, chrome and tin.

Related Products:

Heavy Duty Garbage Truck Cleaner

TRUCK Mounted Cleaner Descaler

Stainless Steel TRUCK Cleaner RXSOLVE

Safety Accessories:

Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment

Featured Product :

Featured Product

Short Description:

↧

HEDP 60%

December 10, 2017, 2:02 am

≫ Next: TRUCK Mounted Cleaner Descaler

≪ Previous: Truck Wash Brightener

Alias:

1-Hydroxy Ethylidene-1,1-Diphosphonic Acid [HEDP 60%],Hydroxyethylidenedi(phosphonic acid); Dequest 2010; Etidronic acid; HEDP, AQUACID 105EX

Active Matter:

58-62

Application:

RXSOL-81-8160-250 chemically having wide range of applications including scale prevention and corrosion inhibition in water treatment.

Hydroxy Ethylidene -1,1-Diphosphonic acid is organophosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. Because of the combination of these properties Hydroxy Ethylidene -1,1-Diphosphonic acid has a wide range of applications. One of the most important applications is in scale prevention and corrosion inhibition in water treatment.

Packing Size:

275.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. It is used as a strong chelating agent for metal ions like Ca, Mg & Fe in water treatment, textile applications. Its efficient inhibition for CaCO3 & CaSO4 alone or in combination with low molecular weight polymers. Very effective in protecting metal corrosion. HEDP also having very strong chlorine stability.

Note:

Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.

Featured Product :

Featured Product

Article News:

Short Description:

Chelating agent, Scale and Corrosion Inhibitor. Scale prevention and corrosion inhibition in water treatment.

↧

TRUCK Mounted Cleaner Descaler

December 9, 2017, 11:40 pm

≫ Next: Rig Wash Liquid 210 Ltr

≪ Previous: HEDP 60%

Cleaning of Scale and mineral deposits from truckmount becomes very easy by using RXSOL-41-4148-010 ( TRUCK Mounted Cleaner Descaler ). Routine cleaning and removal of hard water deposits from truckmount heat exchangers, fittings, valves, screens, metering systems, sensors, and water lines etc always be wise deceision. RXSOL-41-4148-010 premium powder formula of specialty ingredients is a for easier and safer cleaning.

Alias:

Truck Mount Descaler

Application:

Good Advice Apply RXSOL-41-4148-010 on WET surface only, Do not let dry the product on surfaces without rinsing. Every machine is different. Basically, pour liquified descaler ( powder with water premixed ) into the water box. If your truckmount has a bypass orifice remove it and replace the plug or cap on the manifold.

Packing Size:

1.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Inhibitor protects truck mount components.

First of all mix 1 Kg powder with 4 Ltr water to get powder dissolve completely in to the BUCKET. Then disconnect truck mount water inlet and solution outlet hoses. Drain water completely from water box, Then add 4 Ltr powder mixed water into water box to dissolve. Then start engine to run solution through truck mount atleast for 15 minutes to dissolve scale from surface. Finally connect water inlet hose and solution hose, flush with water for 5 minutes. Add 250ml of Alkali Cleaner RXSOL ORG - 6 to water box and run for 2 to 5 minutes to neutralise residual of scale ion. Then circulate system with clear water to remove all loose particle as well as cleaner present inside the system.

Note For heavy scale build-up Truck Mount Descaler may be diluted with mix 1.5 Kg powder with 4 Ltr water and the solution should be circulated for a longer period.

Note:

Dilutions rates recommended :

Light Duty Cleaning : 500 Gram : 4 Ltrs WATER
Normal Cleaning : 1 Kg : 4 Ltrs WATER 15 minutes or Time duration can be increased up to 45 minutes for Heavy deposit cleaning.
Heavy Duty Cleaning : 1 Kg : 4 Ltrs WATER 15 minutes

Related Products:

Concrete Truck Cleaner (CRMC-83)

Heavy Duty Garbage Truck Cleaner

Truck Wash Brightener

Aluminium Brightner Alu Brite

Safety Accessories:

Effectively remove scalers with the help of Polymer Descaling Chemical

Featured Product :

Featured Product

Article News:

Car Coating Remover from RxMarine helps you remove car coating with ease

Short Description:

For removal of hard water deposits from truckmount heat exchangers, fittings, valves, screens, metering systems, sensors, and water lines etc

Information:

Truck Mount descaler manufacturer, Supplier and exporter in various packing and customized packing. Truck mount descaler are avialable with us in Powder as well as in Liquid stage. Powder form of Descaler are easy to carry and storage while liquid stage of Truck mount descaler is easy to use and application. Liquid decaler cane be easily apply in to the system. Premix with water doesn't required as POWDER Truck mount descaler can't use directly for application, its mixing with water must required.

↧

Rig Wash Liquid 210 Ltr

December 10, 2017, 9:27 pm

≫ Next: Electrosol E

≪ Previous: TRUCK Mounted Cleaner Descaler

ALKALINE CLEANER & DEGREASER CONCENTRATE :::---
It is a emulsifier with powerful penetrating agents, corrosion inhibitors and surfactants. Quickly removes oil, grease, gimres, . Best results also achieved for cleaning of tank cleaner or for general degreasing, cleaning and gs freeing for double bottom tanks, wing tanks, pipe lines, fuel oil tanks, etc

Alias:

Mocidet-300, EASY-CLEAN LIQUID

Active Matter:

68-73%

Application:

Rig wash liquid largest manufacturer, supplier and exporter.

Packing Size:

210.00 Ltr.

Image:

Thumb:

Using Procedure:

RXSOL-16-1042-210 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. Can be used as engine room cleaner. Suitable for cargo tank cleaning. Can be used as accommodation cleaner for bulkheads, decks, toilets. Suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc. Effectively cleans glass fibre boats, hulls and painted surfaces

Note:

RXSOL brand is very popular as Manufacturer of Rig Wash, Suppliers of Rig Wash, Dealers of Rig Wash in India / UAE.

Related Products:

Degreaser Bio Degradable HD - 210 Ltrs

Degreaser SB 25 Ltr

Rig Wash Tuff Heavy Duty

Rig Wash Citrus Formula

Rig Wash Green 1000 LTRS

Rig Wash / T-Pol Multipurpose Detergent

Safety Accessories:

Gloves Disposable

RXSOL Rig Wash Cleaning and maintenance procdure

Featured Product :

Featured Product

Video Links:

Rig Wash Cleaner RXSOL

Article News:

Rig Wash Multi-purpose Detergent-one solution to all cleaning needs

Effective Rig Wash Powder

Easy task to remove deposit with the help of Sea Cleaner

Short Description:

ALKALINE CLEANER & DEGREASER CONCENTRATE :::--- It is a emulsifier with powerful penetrating agents, corrosion inhibitors and surfactants. Quickly removes oil, grease, gimres, . Best results also achieved for cleaning of tank cleaner or for general degrea

↧

Electrosol E

December 11, 2017, 3:10 am

≫ Next: Electrosol Quick Dry 25 Ltr

≪ Previous: Rig Wash Liquid 210 Ltr

Excellent Cleaner for Electric Parts

A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Quick evaporation rate and resulting for Cleaningand Degreasing of electrical equipment.It provides immediate and efficient removal with a high evaporation rate.

Alias:

Generator Cleaner, Electrosolv-E, Eazy Electric, Electrosolv-E Unitor Chemical Service Part No.651 604389, Degrease All E

Active Matter:

100%

Application:

Procedure of Use :
RXSOL-16-1090-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1090-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1090-025. Never use RXSOL-16-1090-025 on a running generator or motor. RXSOL-16-1090-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

High dissolving and penetration action.
Excellent degreasing and emulsification power .
Safe on applied electrical insulation.
Non-corrosive .It is safe to use on painted or varnished metal surfaces.
Without chlorinated solvents.
To be used as an alternative to conventional electric cleaners
degreasing and emulsification power .

Safe on applied electrical insulation.
Non-corrosive .It is safe to use on painted or varnished metal surfaces.
Without chlorinated solvents.
To be used as an alternative to conventional electric cleaners

Classification:

Description	Concentration	Product no.
ELECTROSOL - PLUS	95 - 98 %	RXSOL – MC – 1009A
ELECTROSOL Q.D.(QUICK DRY)	93 - 98%	RXSOL – MC – 1009B
ELECTROSOL – Non Flamable	97 - 99 %	RXSOL – MC – 1009C

Product Properties
Appearance	Clear Colourless Liquid	Vapor Density : Heavier than air
Flash Point	63°C (Closed Cup)	Stability : Very stable understandard,.normalconditions
Compatibility
Metal Plastic Rubber	No known effect No Known effect May swell	Note: After use the product must always be well sealed in the drum.
Packaging	Order No	Size (in kgs./lts.)
	RXSOL-16-1090-025	7/25 Lts

Characteristics ;

High dissolving and penetration action.
Excellent degreasing and emulsification power .
Safe on applied electrical insulation.
Non-corrosive .It is safe to use on painted or varnished metal surfaces.
Without chlorinated solvents.
To be used as an alternative to conventional electric cleaners

Classification:

Description	Concentration	Product no.
ELECTROSOL - PLUS	95 - 98 %	RXSOL – MC – 1009A
ELECTROSOL Q.D.(QUICK DRY)	93 - 98%	RXSOL – MC – 1009B
ELECTROSOL – Non Flamable	97 - 99 %	RXSOL – MC – 1009C

Note:

Classification:

Description	Concentration	Product no.
ELECTROSOL - PLUS	95 - 98 %	RXSOL – MC – 1009A
ELECTROSOL Q.D.(QUICK DRY)	93 - 98%	RXSOL – MC – 1009B
ELECTROSOL – Non Flamable	97 - 99 %	RXSOL – MC – 1009C

Excellent

Related Products:

Electro Cleaner Electrical Parts Cleaner

Electrosol NF 25 Ltr

Electrosol Quick Dry 25 Ltr

Electrosol Plus electrical Cleaner

Hand Cleaner Paste Waterless 4 Kg jar

Air Cooler Cleaner 25 Ltr

Carbon Remover 25 Ltrs

D'limonene Degreaser Premium Quality CITROSOLV

Safety Accessories:

Protective Suit HD

Electrosol – An effective cleaner for electric parts

Featured Product :

Featured Product

Article News:

Short Description:

Quick evaporation rate and resulting for Cleaningand Degreasing of electrical equipment.It provides immediate and efficient removal with a high evaporation rate.

↧

Electrosol Quick Dry 25 Ltr

December 11, 2017, 3:10 am

≫ Next: Degreaser Electrical Non Flame

≪ Previous: Electrosol E

Electrical Parts Cleaner CRC Quick Dry Electronic Cleaner. Also used as specialist Electrical Contact Cleaner and Electric Motor Contact Cleaner. its ffective degreasing action with fast evaporation and no residue effect makes no1 choice among our end user customer. The non-flammable property is designed for energized equipment ans use on energized electric motors, fusible disconnects, switchgears, transformers, circuits, insulators, relays, and switches.

Alias:

XRC, Careclean ECS Quick Dry, Electroclean A Quick Dry, Electrosolve -E, arma clean, Electrical contact cleaner, Fast Evaporating Degreaser, IMPA: 55 33 24, Orion 77, 651 604389, Eazy Electric Fast Dry, Florin-2000

Active Matter:

100%

Application:

High dissolving and penetration action.
Excellent degreasing and emulsification power .
Safe on applied electrical insulation.
Non-corrosive .It is safe to use on painted or varnished metal surfaces.
Without chlorinated solvents.
To be used as an alternative to conventional electric cleaners

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

It must be applied concentrated .

RXSOL-16-1009-025 is also fast evaporating leaving no residue. RXSOL-16-1009-025 is ideal for use on electric motors, plant machinery, elevator shafts and motors, generators, condensers, coils, etc.
RXSOL-16-1009-025 is safe to use on metal or rubber surfaces. reduces fire hazards caused by defective electric motors: RXSOL-16-1009-025 rapidly breaks down oils,and waxes. RXSOL-1009 can also be used to remove oil and stains from material.

(TEST A SMALL AREA FIRST )

A few minutes soaking is usually sufficient to loosen and disperse most oily deposits. For severely soiled parts or windings, RXSOL-16-1009-025 cleaner may be allowed to soak into the deposits for up to two hours.

Note:

CLASSIFICATION : * ELECTROSOL QD (quick dry ) *ELECTROSOL NF (Non-flammable ) *ELECTROSOL PLUS APPLICATION : For cleaning of electrical parts .

Electrical Contact Cleaner manufacturers, Electrical Contact Cleaner suppliers, Electrical Contact Cleaner producers, Electrical Contact Cleaner exporters, Electrical Contact Cleaner production unit at mumbai, kandla, Visakhapatnam, tuticorin, chennai, ennore, surat, kolkata, haldia, dubai, fujairah.

Related Products:

Degreaser Electrical Non Flame

Electro Cleaner Electrical Parts Cleaner

Electrosol NF 25 Ltr

Electrosol Plus Low Evaporation Rate

Degreaser Electrical Non Flame

Carbon Cleaner LT

Air Cooler Cleaner 25 Ltr

Paint Remover 25 Ltr

Safety Accessories:

PVC Chemical Resistance Boot

Featured Product :

Featured Product

Article News:

Waterless Hand cleaner price for Mumbai, JNPT

Short Description:

Its rapid evaporation rate enables it to be used for cleaning and decreasing of electrical equipment,motor winding etc.

↧

Degreaser Electrical Non Flame

December 11, 2017, 3:11 am

≫ Next: FORE and AFT

≪ Previous: Electrosol Quick Dry 25 Ltr

Safety Electrical Cleaner & Degreaser is a non-flammable, non-conductive fast-evaporating cleaner penetrates instantly to remove dirt, oil, grease and wax. This is safe industrial grade cleaner meant for electronic equipments, generators, motor-power tools, electrical parts etc.

Being non-flammable, it can be safely used to clean motors and generators. Electrical Cleaner & Degreaser effectively removes the oil, grease, carbon without the need of rinsing with water.

Alias:

Electrosol Non Flammable, GASKET REMOVER

Application:

Safety Electrical Cleaner & Degreaser is used for industrial machineries, metal surfaces and other electrical parts. It is widely used in power stations, refineries, vessels, hotels, aviation industries, oil and gas industries, manufacturing plant etc. to clean Electric motors, generators, air tools, brakes, clutches, chains, sprockets, wire rope, dies, molds, relays, radar equipment, material handling equipment, air conditioners.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

For Spray Method :::

Electrical Cleaner & Degreaser generously on surfaces that require cleaning.
Brush or agitate if necessary
Leave to dry.
For stubborn grease, manual agitation with a brush or cloth may be required.

For DIP METHOD :::

Shake well before use.
Pour the product into a metal container
Soak parts to be cleaned into Safety Electrical Cleaner & Degreaser for about 5 to 15 minutes
Brush or agitate if necessary.
For parts with stubborn grime or sludge, soak for a longer period of time and cover with a tight lid to prevent evaporation loss.

Note:

Note: After cleaning, apply new grease, oil or coating before using the motor.

Article News:

Remove oil, dirt or grease by Electrical non flammable degreaser

Short Description:

Electrical Non Flammable safe degreaser for Electric Motor and Equipment Cleaning

↧

FORE and AFT

December 14, 2017, 1:55 am

≫ Next: Resuscitate Acid Cleaner

≪ Previous: Degreaser Electrical Non Flame

Fore and Aft cleaning chemicals used as a multipurpose cleaner for the various sector which includes food storage areas; Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc; Can be used on windows and portholes. RXSOL premium quality of fore and aft chemically formulated to remove dirt, oil, grease, grime from ferrous and non-ferrous metal surfaces, porcelain, glass, painted surfaces, stone, cement, wood etc.

Alias:

WATER BASED ECO CHEMICALS

Active Matter:

45-48%

Application:

Suitable for multiple cleaning actions to clean floors, tiles, walls, kitchen platform, utensils, paintwork etc. Also, the diluted solution helps to clean furnitures, plastics, vinyls etc.
Don't forget to Rinse off with water after the cleaning.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Mix concentrate materials 150 to 1250 ml with 100 Ltr of fresh water for general cleaning.

Use mops, spray or sponge and rinsed off with water after the cleaning.

Note:

For cleaning of hard surfaces, such as decks, tanks, engine-rooms, etc. These two steps are followed:
High Molecular mixture of CATIONIC and ANIONIC surfactant, to react with all oil and grease molecule

Step	1:	Spray directly on area to be cleaned
Step	2:	With high-pressure clean entire emulsified area

Due to high emulsification & penetration objects achieves optimal cleaning results.
Due to repulsion activity fore aft-Rx preventing dirt from reforming on the surface.

NOTE: Dry surface vastly absorbs the chemical then wet surface so that apply detergent on the dry surface where possible.

Related Products:

Rocor NB Liquid With Indicator 25 Ltr

Descaling Liquid 25 Ltrs

Featured Product :

Featured Product

Article News:

A household name in degreaser for all purpose cleaning

Get squeaky clean floors with Floor Stripper Ultra Concentrate

Short Description:

Multipurpose cleaner for the various sector which includes food storage areas; Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc; Can be used on windows and portholes.

↧

Resuscitate Acid Cleaner

December 14, 2017, 7:20 pm

≫ Next: Slip Coat RXSOL HOLD BLOCK 25 Ltr

≪ Previous: FORE and AFT

Acidic Strong detergent formula specialized for use and suitable for the food industry and cleaning of tile and grout which does not respond to other cleaning agents. It cleans away hard water spots and deposits, grout haze, soap scum, and efflorescence.

Alias:

P3 – HOROLITH V,

Application:

Cleaning of equipment such as pasteurizers, sterilizers and evaporators by removal of salts, lime and rust spots. Also it renews the appearance of ceramic tile, porcelain tile, grout, granite, slate, and sandstone. It is also biodegradable and emits fewer vapors than typical acid cleaners.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Note:

Resuscitate is used when all other cleaners have failed, and is a safer alternative than aggressive acids like phosphoric and muriatic. The proprietary organic acid is twice as effective in dissolving calcium carbonate than phosphoric acid, yet is classified as only a mild skin irritant. Spinergy Resuscitate will readily remove the embedded soil layer thereby renewing the surface of the grout.

Related Products:

Metal Brite

Phosphoric Acid Cleaner Low Foam Food Plant

Tiles And Grout Cleaner ( Restoration )

Safety Accessories:

Acid detergent cleaner for food Industries

Featured Product :

Featured Product

Article News:

Short Description:

Strong Acid detergent Cleaner

Information:

Strong Acid cleaning detergent for pasteurizers, sterilizers and evaporators quickly Removes salts, lime and dissolves rust spots.

↧

Slip Coat RXSOL HOLD BLOCK 25 Ltr

December 15, 2017, 9:25 pm

≫ Next: Aqua Break RX 25 Ltrs

≪ Previous: Resuscitate Acid Cleaner

EMULSION BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Alias:

Slip Coat Hold Block Resist, RBM HOLD BLOCK , GREEN BARRIER , HOLD SURFACE PROTECTOR, PRELOAD 300, HOLD BARRIER XR, Paint Protector

Application:

Rxsol hold block is a Heavy Duty protective Solution for hold of vessels, which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Note:

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Coat RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Related Products:

Bilge Coat RXSOL

Hold Wash Concentrate RX

AQUATUFF LIQUID 50 Ltr

Cement Remover RX Hold

Featured Product :

Featured Product

Article News:

Aquatuff price for Mumbai, Kolkata, Chennai, Vizag, Kandla

Short Description:

Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Information:

Polymer based water soluble liquid product which is resulting thin transparent and temporary film on cargo hold surfaces. Polymer based Thin film acts as barrier layer between the cargo and the ship hold surfaces.

↧

Aqua Break RX 25 Ltrs

December 16, 2017, 11:31 pm

≫ Next: Aqua Break RX HD 25 Ltr

≪ Previous: Slip Coat RXSOL HOLD BLOCK 25 Ltr

It is a new technology surfactant degreaser ( high solvency and emulsification effect ) , Being free from caustic and hydrocarbons it is very gentle on hands & ideal for cleaning walls, wood works, metal and other areas for removal of grease, oil, sludge, carbon deposits, general dirt and grime.

Alias:

AquaSol , Drew Fresh 2000, 651 575613, Aquabreak PX Unitor Chemical Service Part No. 651 575613,

Active Matter:

45-48

Application:

RXSOL-16-3003-025 Mixture of Emulsifier, new technology surfactants ( With high solvency and emulsification effect ) , Corrosion inhibitors, Rust preventive. due to free from caustic and Hydrocarbon very gentle on hands & ideal for cleaning Walls Wood works, Metals and all areas . Acts as superior quality cleaner / degreaser .

Fields:-
RXSOL-16-3003-025 containing corrosion inhibitors to prevents the corrosion of metals such as Aluminium, Copper, Brass and Tin. RXSOL-16-3003-025 is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Specialized for all types of cleaning and degreasing.may be applied by brush, handspray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed.

Tank Cleaning:-
(Cargo tank cleaning after mineral, animal, vegetable and fish oil. )

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Method of Application and Doses:-
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate the system with RXSOL-16-3003-025 Solution

1.	Cleaning with washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).
2.	Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1%).
3.	Spot cleaning. Hand sprayed neat or diluted up to 1-10 parts water and left for about 15-20 minutes before.washing.off.

DOSAGE:-

Nature Of Residue	Hand Spray	Direct Injection	Circulation
Veg.Oil (Drying/Non Drying Fish Oil,Alcohol,Acids,Amines)	1-10%	0.03-0.5%	0.05-0.7 %
ORGANIC MATERIAL (HYDROCARBON)	NA	0.0 5-0.5%	0.05-0.7%

RXSOL-16-3003-025 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. Can be used as engine room cleaner. Suitable for cargo tank cleaning. Can be used as accommodation cleaner for bulkheads, decks, toilets. Suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc. Effectively cleans glass fibre boats, hulls and painted surfaces

Note:

Aquabreak plays very important role in degreasing as well as cleaning action. Its unique formulation with polymer makes difference from other supplier. Alkyl glucoside is major component of Aquabreak.

Related Products:

B Solve Tank Cleaner & Degreaser

Ballast Tank Cleaner

Hold Wash Concentrate RX

Bilge Clean 25 Ltr